Filter By:
- Parts & Accessories (39)
- Trainers (4)
- Smart Trainers (5)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Indoor Cycling
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes
$39.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- The RPM speed installs easily with no magnets required
- It only weighs 16.5 grams with the mount included
- Provides accurate speed data during your ride
- Mounts on most front wheel hub with a secure silicone casing
- Two LED lights show the sensor's device connection (blue) and speed detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM Speed will fit with most bikes and frame sizes
$69.99
This freehub supports '18, '20 Edition KICKR, KICKR V6 and KICKR CORE with most* Campagnolo 10, 11, and 12 speed cassettes.
The freehub for the KICKR 14 and 16 is no longer available.
*Campagnolo cassettes with 8 inner arms on the largest cog are NOT compatible with the KICKR ’18/KICKR V6 and KICKR CORE version.
$69.99
KICKR XDR Freehub body allows you to use your KICKR with the new SRAM AXS drive train system. This kit includes a 1.8mm spacer for XD compatibility.
Compatibility: KICKR '18, v5, v6, MOVE and KICKR CORE
$79.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes
$79.99
TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours.
- Dual band technology
- Real time heart rate and calorie tracking
- Advanced performance material
- USB rechargeable battery
- LED indicator lights
- Two adjustable bands included
- Third party app compatibility
- Apple watch and apple TV integration
$629.99
$899.99
30% Off
The KICKR CORE is the latest in Wahoo's line of smart indoor bike trainers. It delivers a realistic, accurate, and quiet indoor training experience by using the proven flywheel technology and advanced algorithms of Wahoo's legendary indoor bike trainers. The KICKR CORE indoor trainer is built with the durabilty to withstand all of your indoor training sessions and no other brand of smart trainers has more apps and software training options, including Zwift and Trainer Road. The Core also features built-in cadence measurement, without the need of an external sensor.
PLEASE NOTE: Some assembly is required. The KICKR CORE does not include a cassette or wheel block. These items can be purchased separately.
- Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined.
- KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience.
- The new KICKR features 12x142 and 12x148 thru axle compatibility in addition to standard 130/135mm quick release. Click to find out if your bike is compatible.
- Enhanced power accuracy to provide accurate power measurement and generate up to 1800W.
- Maximum percent grade adjusts to simulate up to a 16-degree incline.
- Visual confirmation that KICKR CORE is powered, connected and transmitting via Bluetooth and/or ANT+.
- ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR CORE to be controlled from any FE-C enabled device or application.
- Robust steel construction ensures the KICKR CORE stays in place while you crank out the watts and stands up to years of heavy use.
- When connected to your device, it automatically sets your resistance via your favorite app or software.
- The KICKR flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and TrainerRoad.
- Get these vital cycling metrics on your indoor ride.
- Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad.
- Compatible with a third party power meter.
$11.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
$13.99
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions.
- Highly absorbent
- Measures 30cm x 115cm
$29.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
$29.99
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.
$29.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
$59.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
$69.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
$69.99
- Adapter for Tacx Direct Drive trainer
- 01 is compatible with 142 x 12mm and 148 x 12mm
- 02 is compatible with 135 x 10mm
- 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive
trainer), 142 x 12mm and 148 x 12mm
- 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the
thru axle mount on a Tacx NEO or FLUX Smart trainer.
$69.99
- Large and rollable trainer mat
- Made from high quality, water-repellent 6mm thick foam
- Protects your floor against scratches and sweat
- Muffles noise and vibrations
- 180 x 85 cm
$99.99
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
$109.99
Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.
$109.99
With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.
$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$299.99
Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride.
SIMPLE SETUP
With just two simple clicks, you'll be ready to ride.
SMALL BUT STABLE
This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride.
EASY TO STORE
Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position.
MAGNETIC BRAKE
You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it.
RESISTANCE CONTROL
A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts.
REALISTIC RIDE FEEL
An actual flywheel generates a realistic and smooth pedal stroke.
SMOOTH AND QUIET
The closed resistance unit reduces noise and makes for a smoother ride.
HOW FAR AND HOW FAST
Add a speed sensor (sold separately) to track how far and how fast you're riding and train with some of your favorite apps.
FEATURES
- Magnets: 2x8 Permanent ferrite magnets
- Transmission: Roller, 30 mm
- Electrical requirements: No voltage required
- Power indicator: None
- Connection indicator (ANT/BT): None
- Firmware upgradable: No
- Suitable bikes: Road, Tri, & MTB with skewer quick release
- Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm)
SPECIFICATIONS
- Max. power (40 km/h): 1050 Watt
- Simulation of descent: No
- Max. torque: 17 Nm
- Max. brake force: 50 N
- Flywheel: Actual of 1.6 kg
- Mass inertia: 9.18 kg (20.2 lbs)
- Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in)
- Height 410 mm (16.1 in)
- Dimensions when folded 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in)
- Weight 8.53 kg (18.8 lbs)
$24.99
The Saris Leveling Block keeps your bike level with your trainer.
- Adds stability to your training ride.
- For use with any rear wheel-mounted trainer.
- Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
$49.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors.
- Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions.
- This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch.
- The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems.
- Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly.
What's Included
- Thru axle
- Washers
- End caps with bolts
$79.99
Protects your floor from sweat and bike grime.
Product Features:
- Protects your floor from sweat and bike grime.
- Keeps your trainer from "walking" during intense workouts.
- Durable construction absorbs vibration and noise.
- Training mat measures 65 x 36 inches.
- Black PVC foam gives the training mat superior sound absorption.
- Resistant to moisture, and easy to clean with soap and water when necessary.
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Page 1 of 2
Next page