Indoor Cycling

Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm

Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura. - Alloy clamp for mounting your own device on handlebar or stem - Lightweight and rustproof aluminum construction - Hex wrench required for instillation and removal - Clamp body has (1) M5 Thread hold in center - 22.2 mm-28.6 mm diameter range

• Gray

The Mag Riser Block 3 from Minoura lifts up your front wheel during a training session to be at a natural level. This block fits both MTB and Road bike tire widths. - Fits under front wheel to level the bike to get natural riding on training - Double grooved design fits your narrow or wide ties - Polyethylene material minimizes weight at 1/2 lb. - 8.6D X 4.7W X 2.75H (inches)

Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only

The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground

• Plastic riser block allows the position of front wheel at one of two heights

Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.

- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.

A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

The Gel Block is an indispensable accessory for perfecting your position on the bike and provides a more natural feel to your training. - Reduces vibrations on the handlebars for more comfortable training - Non-slip Elastogel insert ensures maximum stability and alignment of the front wheel - Suitable for road and MTB

The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike

This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage

Connect your PC to CycleOps VirtualTraining.

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only

• 35.5-inches x 79-inches • Black

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts

- Includes Sweatcover for Smartphone (T2931) and Towel (T2940) - 891076

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

Bluetooth and ANT+ Heart Rate Sensor & Calorie Tracker Connect. Track. Share. The TICKR heart rate monitor accurately tracks your heart rate and calorie burn during any activity or workout. Its new design makes it the lightest and slimmest heart rate monitor on the market! Equipped with Bluetooth and ANT+ technology, TICKR offers an easy and reliable way to connect heart rate to your favorite training apps and fitness devices, and now supports up to three simultaneous Bluetooth connections. The new integrated heart rate sensor and strap design provide a more secure connection and fit, so your training can be optimized, measured, and shared. NEW! INTEGRATED CHEST STRAP DESIGN The integrated sensor and strap design of the TICKR provides a more secure connection and a more secure fit to prevent sliding and shifting while working out. NEW! SLIM, LIGHTWEIGHT HEART RATE SENSOR POD At 1.7oz (48g) and 12.01mm thick, the TICKR is the lightest and slimmest heart rate monitor and strap combination on the market, not to mention the most comfortable! NEW! MULTIPLE SIMULTANEOUS BLUETOOTH CONNECTIONS TICKR supports up to three simultaneous Bluetooth connections for a trouble-free start to your workout. NEW! TOP DISPLAY LED INDICATOR LIGHTS Two LED lights show visual confirmation of the TICKR connection status via Bluetooth and / or ANT+: searching for a connections (blue slow blinking light), connecting (blue fast blinking light), and reading heart rate (red blinking at current beats per minute). DUAL-BAND ANT+ AND BLUETOOTH TECHNOLOGY Both ANT+ and Bluetooth capabilities allow for a wireless connection to both smartphones and GPS devices at the same time or separately. REAL-TIME HEART RATE, CALORIE, AND WORKOUT DURATION TRACKING TICKR measures vital workout metrics, including heart rate, calorie burn, and workout duration in real-time with the Wahoo Fitness app. These metrics can also be sent to compatible third-party apps that track these metrics. FRONT SENSOR & STRAP CONNECTION The front connection on the TICKR sensor and strap allows you to gear up and go quickly. You don’t have to fumble through side placements of snaps and hooks. COIN CELL BATTERY Includes a coin cell battery that can last for over 500 hours of workouts. ADVANCED PERFORMANCE MATERIAL STRAP Made from advanced performance materials, the TICKR strap is designed to fit comfortably chest, yet stay securely in place during intense activity. APPLE WATCH AND APPLE TV INTEGRATION Connect directly via Bluetooth to your Apple Watch or Apple TV as another option for gathering heart rate data while you workout. THIRD PARTY APP COMPATIBILITY Works seamlessly with over 50 apps - including Zwift, The Sufferfest, Peloton for cycling and Runkeeper and MapMyRun for running. TECH SPECS - Dimensions (LxWxH): 2.5" L x 0.2" W x 1.5" H (6.3cm L x 1cm W X 3cm H) - Weight: 1.7 oz (48 g) with strap - Battery: Coin Cell (CR2032) - Battery Life: Over 500 active hours - Sweatproof: Yes (Handwashable Strap) - Water Rating: IPX7 (Waterproof up to 5 ft.) - Strap Length: Adjustable from 23" to 48" IN THE BOX - TICKR heart rate pod - Adjustable soft strap - CR 2032 Battery (installed) - Quick Start Guide - Important Product Info Guide

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.

TRAINER THRU AXLE ADAPTER FOR SARIS TRAINERS WHAT'S INCLUDED: - Thru axle - Washers - Endcaps with bolts - The 148x12mm adapters also come with a shorter bolt action slider tube. TRAINER COMPATIBILITY The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. BIKE COMPATIBILITY Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes. 148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for: - 148 x 12mm - 142 x 12mm - 1.5 thread pitch

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes

The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house. Dimensions: 1.8m x .9m

Protects the bicycle from sweat and avoids corrosions or rust. - Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish - Sits above the top-tube and can be adjusted for different bicycles - Washing-machine friendly

Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party! - Non-slip surface keep you safe while in cycling cleats - Protects floors from sweat and bike grime - Water-repellent surface does what it was designed to do – keep sweat off your floor - Compress-ability ensures trainer stays put during intense efforts - Easily rolls up for storage - Cleans easily with soap and water - Absorbs noise and vibration - Enhances overall stability of any indoor trainer setup - 4mm (5/32?) thickness is optimal balance of support and storage

Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.

- Adapter for Tacx Direct Drive trainer - 01 is compatible with 142 x 12mm and 148 x 12mm - 02 is compatible with 135 x 10mm - 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive trainer), 142 x 12mm and 148 x 12mm - 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the thru axle mount on a Tacx NEO or FLUX Smart trainer.

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

Bluetooth and ANT+ Heart Rate Sensor with Calorie Tracking and Memory Every effort counts with the TICKR X. Designed to help you get the most out of any workout, the TICKR X tracks heart rate, calories burned, running analytics, and indoor cycling cadence. Equipped with Bluetooth and ANT+ technology, it connects to your favorite training apps, GPS watches, and bike computers, and now supports up to three simultaneous Bluetooth connections. Its new design makes it the lightest and slimmest heart rate monitor on the market, plus the new integrated heart rate sensor and strap design provide a more secure connection and fit! TICKR X even has 50 hours of onboard memory for heart rate and calorie data, giving you the freedom to train device-free. NEW! INTEGRATED CHEST STRAP DESIGN The integrated sensor and strap design of the TICKR X provides a more secure connection and a more secure fit to prevent sliding and shifting while working out. NEW! SLIM, LIGHTWEIGHT HEART RATE SENSOR POD At 1.7oz (48g) and 12.01mm thick, the TICKR is the lightest and slimmest heart rate monitor and strap combination on the market, not to mention the most comfortable! NEW! MULTIPLE SIMULTANEOUS BLUETOOTH CONNECTIONS TICKR X supports up to three simultaneous Bluetooth connections for a trouble-free start to your workout. NEW! TOP DISPLAY LED INDICATOR LIGHTS Two LED lights show visual confirmation of the TICKR X connection status via Bluetooth and / or ANT+: searching for a connections (blue slow blinking light), connecting (blue fast blinking light), and reading heart rate (red blinking at current beats per minute). NEW! ANT+ RUNNING DYNAMICS When TICKR X is paired with a GPS multi-sport or running watch, the ANT+ Running Dynamics will be broadcast on the TICKR X and recorded on the watch for real-time feedback. Seeing this data in real-time can help you make form adjustments, such as proper cadence, to improve your performance during your workout. DUAL-BAND ANT+ AND BLUETOOTH TECHNOLOGY Both ANT+ and Bluetooth capabilities allow for a wireless connection to both smartphones and GPS devices at the same time or separately. REAL-TIME HEART RATE, CALORIE, AND WORKOUT DURATION TRACKING TICKR X measures vital workout metrics, including heart rate, calorie burn, and workout duration in real-time with the Wahoo Fitness app. These metrics can also be sent to compatible third-party apps that track these metrics. FRONT SENSOR & STRAP CONNECTION The front connection on the TICKR X sensor and strap allows you to gear up and go quickly. You don’t have to fumble through side placements of snaps and hooks. COIN CELL BATTERY Includes a coin cell battery that can last for over 500 hours of workouts. INTERNAL MEMORY With on-board memory that can record your workout, the TICKR X allows you to leave your smartphone behind and still capture heart rate, calorie burn, and workout duration. The memory holds up to a 50 hours of workouts! INDOOR CYCLING CADENCE When paired with the Wahoo Fitness App and an indoor cycling workout is selected, the TICKR X will measure cycling cadence. RUNNING ANALYTICS The TICKR X has a built-in accelerometer that measures indicators of running form: Stride cadence, vertical oscillation, and ground contact time. TREADMILL MODE TICKR X features a special workout mode for tracking speed and distance data while running on the treadmill. After a completed calibration exercise in the Wahoo Fitness App, the TICKR X uses your ground contact time and time of workout, to accurately determine your distance and pace while running on a treadmill. WAHOO RUNNING SMOOTHNESS When using the Wahoo Fitness App, the TICKR X measures running form and efficiency across three dimensions that can help you improve your individual running form. ADVANCED PERFORMANCE MATERIAL STRAP Made from advanced performance materials, the TICKR X strap is designed to fit comfortably chest, yet stay securely in place during intense activity. APPLE WATCH AND APPLE TV INTEGRATION Connect directly via Bluetooth to your Apple Watch or Apple TV as another option for gathering heart rate data while you workout. THIRD PARTY APP COMPATIBILITY Works seamlessly with over 50 apps - including Zwift, The Sufferfest, Peloton for cycling and Runkeeper and MapMyRun for running. TECH SPECS - Physical Dimensions (LxWxH): "2.5"" L x 0.2"" W x 1.5"" H (6.3cm L x 1cm W X 3cm H) - Weight: 1.7 oz (48 g) with strap - Battery: Coin Cell (CR2032) - Battery Life: Over 500 active hours - Sweatproof: Yes (Handwashable Strap) - Water Rating: IPX7 (Waterproof up to 5 ft.) - Strap Length: Adjustable from 23" to 48" IN THE BOX - TICKR X heart rate pod - Adjustable soft strap - CR2032 Battery (installed) - Quick Start Guide - Important Product Info Guide

Protects your floor from sweat and bike grime. Product Features: - Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise. - Training mat measures 65 x 36 inches. - Black PVC foam gives the training mat superior sound absorption. - Resistant to moisture, and easy to clean with soap and water when necessary.

TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours. - Dual band technology - Real time heart rate and calorie tracking - Advanced performance material - USB rechargeable battery - LED indicator lights - Two adjustable bands included - Third party app compatibility - Apple watch and apple TV integration

- Sram XD and XDR freehub for Direct Drive trainers (Drivo and Direto's family, Suito, Turno, Kura, Turbo Roteo and Volano). - Compatible with 12 speed cassette.

Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer. - Reads data based on the type of trainer used. - Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices. - When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.

Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

The Training Mat is the finishing touch to your training area. Placed between the home trainer and the floor, it improves comfort and protects your home from oil, dirt, and sweat. Plus, it limits the noise produced by training, especially on wooden floors. - Easy to roll up and store away - Dampens vibrations - Easy to clean - Length: 1800mm - Width 900mm

Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

The Elite Smart Sterzo riser block allows steering up to 34 deg while riding your rear wheel trainer while using ANT and Bluetooth communication protocol, interacts with compatible apps to give you the most realistic indoor ride. It’s rotating pivot features a practical automatic return system for you to easily get the handlebar back to its original position. Compatible with tires up to 56mm wide

Everything you need for the best indoor trainer experience possible. - Can be used across a wide range of trainer setups. - Includes Trainer Mat, Climbing Block and Saris towel.

- Smooth and powerful magnetic resistance - Heavy-duty steel frame - Folds for easy storage - Fits MTB wheels 26"-29"

No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it. Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Features five adjustable levels of resistance - Compatible with Zwift and other indoor training apps

Hook your bike up to Sunlite's F2 Trainer and ride whenever you want, regardless of weather, daylight or schedule issues. It features a heavy-duty steel frame for a stable base when you're cranking on the pedals and a quiet magnetic resistance unit for a real-world feel.

Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps

Top resistance unit, innovative frame: excellence renewed - 8 resistance levels adjustable by a practical selector on the handlebar. - Use the Misuro B+ sensor for compatibility with the My E-Training or third party apps. Tech info - Novo frame: integration of steel and technological plastic materials. - Magnetic resistance unit, very compact. - Maximum stability at high speeds or at maximum effort guaranteed by the absorbing structure of the frame. - Lifting of the bicycle is limited to the minimum. - Fast fixing system: the bicycle can be clamped and released with a single quick operation. - New adjustable support system, allowing an adequate and constant pressure between the roller and tire. - 30 mm diameter elastogel roller. - The training roller folds up easily and becomes compact for easy transport or storage when not in use. - Adapts to all wheels from 24" to 29".

The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart

Hook your bike up to Sunlite's F1 Trainer w/Remote and ride whenever you want, regardless of weather, daylight or schedule issues. It features a heavy-duty steel frame for a stable base when you're cranking on the pedals and a quiet magnetic resistance unit for a real-world feel. The remote lever attaches to your handlebar for easy resistance adjustment. Plus, this trainer includes an easy-to-use steel quick-release lever.

Take on any race, club ride, or weekend adventure with confidence. When you add Saris rollers into your training routine, you'll increase your balance, control, and ability to ride a straight line — all of which translate to more efficiency, power, and technique on the road. And, because you have to pedal 100% of the time to balance your bike, you get an amazing workout, no matter your pace. - Improve balance, control, and ability to ride a straight line. - Aluminum roller drums run silently and smoothly. - Precision-lathed 3.25" aluminum roller drums won't distort in heat or sunlight. - Fold flat or stand on end for convenient storage. - Designed for both indoor and outdoor use - 16" wide wheel base fits just about any size of bike and allows plenty of room to move around. - Rubber foot pads ensure that the only thing moving on the rollers are the drums, providing a secure, sturdy ride. - Durable steel-frame construction - Adjustable belt for right and left dismount - Resistance Roller uses zero moving parts to deliver quiet magnetic resistance. - Maximum wheelbase 44.5" (axle to axle) - Minimum wheelbase 37.5" (axle to axle)

Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps

Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride. SIMPLE SETUP With just two simple clicks, you'll be ready to ride. SMALL BUT STABLE This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride. EASY TO STORE Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position. MAGNETIC BRAKE You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. RESISTANCE CONTROL A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts. REALISTIC RIDE FEEL An actual flywheel generates a realistic and smooth pedal stroke. SMOOTH AND QUIET The closed resistance unit reduces noise and makes for a smoother ride. HOW FAR AND HOW FAST Add a speed sensor (sold separately) to track how far and how fast you're riding and train with some of your favorite apps. FEATURES - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Road, Tri, & MTB with skewer quick release - Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 1050 Watt - Simulation of descent: No - Max. torque: 17 Nm - Max. brake force: 50 N - Flywheel: Actual of 1.6 kg - Mass inertia: 9.18 kg (20.2 lbs) - Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in) - Height 410 mm (16.1 in) - Dimensions when folded 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in) - Weight 8.53 kg (18.8 lbs)