Filter By:

  • Show More Brands

  • Show Fewer Brands

Bells/Noise Makers

Delta Airzound Bike Horn
$39.99
- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting
Mirrycle Incredibell Brass Solo
$12.00
Don't let the half-pint stature fool you, Mirrycle's little Incredibell Brass Solo packs the beautifully resonant ring of solid brass. Its compact size and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and it rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
Mirrycle Incredibell Brass Duet
$9.99 - $14.99
Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
Knog Oi Bell - Small
$19.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
Knog Oi Bell - Large
$19.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
Mirrycle Incredibell Adjustabell 2
$8.99
Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters
Serfas BLB-201 Brass-Multi Strike Handlebar Bell
$10.00
Ring-a-ding-a-ding! Get noticed and keep slowpokes out of your way with Serfas' line of minimalist-style, simple-to-use handlebar mounted bicycle bells. The perfect socially acceptable alternative to shouting crowd favorites such as "watch out!" and "move it or lose it!" - Brass Construction (Longer Ringing Tone Compared To Aluminum Construction) - Multi-Strike Mechanism - Secure Screw Type Bracket w/ Rubber Insert - Polished Brass Finish - Fits 19 - 22.2mm Diameter Handlebar
Serfas BLA-201 Aluminum-Multi Strike Handlebar Bell
$5.00
Ring-a-ding-a-ding! Get noticed and keep slowpokes out of your way with Serfas' line of minimalist style, simple-to-use handlebar mounted bicycle bells. The perfect socially acceptable alternative to shouting crowd favorites such as "watch out!" and "move it or lose it!" - Aluminum Construction - Multi-Strike Mechanism - Secure Screw Type Bracket w/ Rubber Insert - Anodized Silver Finish - Fits 19 - 22.2mm Diameter Handlebar
Crane Bell Co Flex Tite Bell
$21.90
- Crane bells are some of the finest bells available - Timeless designs with a loud and clear tone - Features the Cat-Eye Flex-Tite bracket, which installs without tools on most areas of the cockpit. - Made in Japan
Osaka Roadie Clip Bells
$19.90
- Designed with road drop bars in mind - Can mount on the brake hood, On cable housing, And on some flat bar levers (Levers need to have flat section less than 9mm deep) - Clamps on with a screw. Simply turn the bell dome to loosen and tighten - Reversible for right and left hand use - Does not use a spring loaded clip - Made in japan
CatEye PB-1100P Bell
$14.00
An incredibly loud brass bell (approximately 60 db) from CatEye meets their FlexTight mounting band for mounting versatility across all types of handlebars. The bright, clean sound of brass alerts other pedestrians and riders to your presence.
Incredibell Trail Bell
$21.00
Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.
Mirrycle Incredibell Bellini
$11.00
Don't let the tiny size fool you. Mirrycle's Incredibell Bellini is little, light and gets noticed! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Weight: Black & Silver 17g, Brass 28g - Dome Diameter: 28mm (1.1") - Fits handlebars with 21mm – 22.6mm (.83" – .89") outside diameters
Mirrycle Original Incredibell
$10.99 - $12.00
Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters
Dimension Red Bell Pepper Bell
$6.99
Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for YouTube sound clips!
Portland Design Works Alexander Graham Bell
$25.00
Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - ?Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty
Portland Design Works King Of Ding II Bell
$25.00
Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars
Dimension Classic Bell
$6.99
Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!
Dimension Burger Bell
$9.99
Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!
Mirrycle Incredibell Big Brass
$14.99
Made of solid brass, this bell’s melodic sound is full and old-fashioned. Big and brassy, the perfect accompaniment for cruisers, comfort, and town bikes. - Dome Diameter: 51mm (2") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
Knog Oi Luxe Bell - Small
$39.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g
Mirrycle Incredibell Jellibell
$11.99
The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters
Nutcase Bell
$15.00
Let 'em know you're coming...or announce your awesome arrival with a stylin' Nutcase bike bell. All you have to do is attach it to your handlebars and you're ready to ching-ching your way down the street. Deck of playing cards for your spokes sold separately.
Planet Bike Courtesy Bell Classic
$18.99
Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell Classic. This bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.
Dimension Flat Compass Bell
$8.99
Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!
MSW Big Ringer Bell
$15.99
This is a big bell with a big ring. At 83mm across, this steel bell sends a loud, two-tone ring that is sure to catch the ear of anyone in your path. The handlebar mount on the bottom of the bell is adjustable to fit all common handlebars and holds tight for surefire ring-ability while you roll.
Incredibell Lolo
$11.99 - $13.99
A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters
Incredibell Ring-O-Ring Bell
$12.00
Little, Light, & Loud! Our Original Incredibell has been redesigned for quick and easy mounting on nearly any handlebar. The pivoting dinger can be rotated to any position.
Osaka Rin Rin Mini Bells
$11.90
- Rin rin mini bells produce an extremely clear tone. Available in a wide variety of colors including white - Made in japan
Planet Bike Courtesy Flexi Bell
$8.99
The Courtesy Flexi bell gives you the flexibility to mount it on handlebars of any diameter and other locations such as your stem. Its diminutive size and clean tone make it a great way to announce to other path users that you are passing on the left. - Stretch strap mounts quickly and securely attaches to bars or stem - Diminutive size won’t clutter up your handlebars - Lightweight brass bell has a clean sound - Fits bar diameters 16mm – 42mm - 360-degree dinger rotation for perfect positioning - High fatigue spring
Page 1 of 3 Next page