Parts

The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install

Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps

The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with Shimano Asymmetric 110 BCD cranks or Campagnolo CX10/11 cranks - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life

Designed to fit any 96 Symmetric BCD Shimano Cranksets. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Chainline is 49mm - Chainrings are threaded for standard M8 chainring bolts for no-nut installation

Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075 Aluminum for long life - Use of a clutch-style rear derailleur is recommended

- Bar end plugs are vital for any bike. - The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.

Light, strong with extra tall teeth, the Wolf Tooth Aluminum Single Speed Cog is a lightweight option for single speed cogs that's offered in a variety of sizes. - Wide 4.5mm base won't dig into your freehub - Made of 7075 Aluminum Alloy for durability and lightness - Made in the USA

The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. - Compatible only with Hyperglide+ 12-speed chains - For use with Shimano XTR M9100 series cranksets - Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles

The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

ReMote Dropper Lever - Lever pivots on a 21mm ball bearing for smooth operation - Cable Kind Clamp does not damage secured cables and features captive hardware. - Includes barrel adjuster for on the fly changes - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.

- The ReMote BarCentric is a dropper lever option for bikes with front shifters, lockout levers, or e-bike controls. - The slender design of the ReMote BarCentric allows it to easily fit between the left grip and levers with four potential lever positioning options to avoid any interference with existing levers. - This dropper lever has a ring shape that encompasses the handlebar, while also serving as a pivot point to provide the rider with extra leverage, making it easier to press the lever. - Compatible with left side controls including 2x shifters, suspension lockout levers, and under-bar e-bike controls - Large, smooth, sealed Enduro ball bearing that encircles the handlebar - Clean and efficient cable routing flows around disc brake levers - Adjustable reach for ideal ergonomics and controls clearance - Compatible with all cabled actuated droppers posts

The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details

104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest-lasting wide/narrow chainrings on the market. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side, which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris, which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility: - Fits any 104 BCD crankset - Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long, with exception to 30T rings, which are threaded and require bolts that are 7-10mm long - If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm) - 32T 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore) - All sizes of 104 BCD chainrings are compatible with QUARQ power meters - Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains - If using a 9-speed drivetrain, use a 10-speed chain. It fits tighter for better chain retention Specifications: - Mount type: 104 BCD - Chain Compatibility: Drop-Stop ST for Shimano 12spd Hyperglide+ chains

Wolf Tooth Supple handlebar tape is extra thick, extra wide, extra soft, and extra tacky. Designed for the abuse of unforgiving trails. The 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - Washable surface is resistant to wear and packing out - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch - Length: 152cm

Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the - chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule

Display packaged headset spacers for 1-1/8" fork steerer. Black anodized aluminum. Includes one each: - 2.5mm - 5mm - 7.5mm - 10mm

Aluminum headset stack spacers precision-cut to ensure proper headset function. - Precision-cut for proper function - Inner Diameter: 28.9mm - Outer Diameter: 34.4mm - Precision-machined aluminum

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30

BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 127g

Wheels Mfg original BB86/92 bottom bracket is a significant upgrade to any OEM BB86 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 114g

Wheels Mfg original BB86/92 bottom bracket is a significant upgrade to any OEM BB86 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro Angular Contact (24/22mm SRAM non-drive-side bearing is ABEC-3) - Bottom Bracket/Frame Interface: BB86, BB92, PF90 - Bottom Bracket Shell Width: 86mm - 92mm - Over Bearing Width: 92mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Bottom Bracket Shell I.D.: 41mm

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Kit includes one (1) 1-1/8" x 20mm spacer

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 40mm spacer

Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

This assortment of chainring spacers contains 120 pcs. in a clear plastic storage box. Kit includes: - (20) 0.6mm - (20) 1.2mm - (5) 2mm - (5) 3.8mm - (5) 2.2mm - (5) 3mm - (5) 3.5mm - (10) 4mm - (10) 4.3mm - (10) 4.6mm - (10) 5mm - (5) 5.3mm - (5) 7.1mm - (5) 8.3mm

Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.

Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.

Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5

Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25 bearings are Dura-Ace or Campagnolo Record quality.

This Wheels Manufacturing Hollowtech II Crankarm Fixing Bolt For Late Model Shimano Road Cranks and LX keeps your Shimano crankset with 24mm spindle nice and snug. It is required to achieve perfect bottom bracket bearing preload.

PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 114g

External English (BSA) threaded road bottom bracket for 68mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacer (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Gray - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 111g

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application - Effective August 2018: These hangers DO NOT INCLUDE attachment hardware. Please see related items for suggested bolts - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

The Wingnut PadLoc grip solves two common issues with a single solution. Not only does the PadLoc design eliminate any possibility of unwanted grip rotation, it also removes the need for a metal outboard clamp and is then replaced by the infinitely more comfortable PadLoc Relief. - Weight: 100g - Size: 135mm length x 32mm diameter x 48mm wing - Color: Black/Grey, Grey/Black - Compatible with PadLoc-ready bars only

The Vision Track Crank features oversized solid forged aero arms optimized for rigidity and a deep-tooth 49T chainring, as well as an ultra-stiff 30mm spindle. The 386EVO spindle design assures compatibility with all major bottom bracket shells. - Solid forged alloy 6061 - Forged 7050 30mm spindle - Polished anodized black with laser graphics - Number of Chainrings: Single - Chainline/Hub Compatibility: 120 Hubs - Crank Intended Use: Track - Pedal Spindle: 9/16" - Rings: 49 - Spindle Interface Type: 386 EVO - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chainring BCD: 144 - BB Included: No