Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Your Search: "multi tool"

$9.95
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
$9.95
Prestalever is Quicker and Speedier than anything you've ever used. Our Patent-Pending Rim Hook with Honeycomb reinforced Box-Section Design is the key to our faster, safer, easy-to-use tool. Remove tires in seconds! Prestalever is Quicker and Speedier than anything you've ever used. Our Patent-Pending Rim Hook with Honeycomb reinforced box-section is the key to our faster, safer, easy-to-use tool. As you scoop the tire bead with the Prestalever, the slot underneath we call the "rim hook" naturally drops inside the rim. It prevents the Prestalever from slipping out, so you don't drop the bead. The rim hook stops the Prestalever at an easy-to-hold angle on the side of the rim. Then you simply glide the lever around the rim, and the tire peels-off as you go. The Prestlever is made of slippery Nylon, greatly reducing the force needed to remove tires. When you're done, twist the Prestalever 90 degrees to raise the rim hook out of the rim. Our box-section design allows the twist-action to easily stop at 90 degrees so the lever slides out easily. Install tires without strain. Our thick tip on the tire installer-end prevents catching and pinching tubes inside your tire. The bead-grabbing edge gives the right balance between leverage and lifting force, making it as easy as possible to complete tire installation. Presta Core tool is now essential. Even Bicycle Presta tubes now include removable cores. This gives you the added option of using tire sealant inside the tube of your standard tire. Removable cores are not always fully tightened at the factory. A loose core could cause slow leaks, or could even become unscrewed while using inflation devices. Tubes should be checked during installation and regularly afterwards for Presta core tightness. Don't carry an extra tool for chains! The Prestalever quick-link breaker is an effective emergency tool if you need to remove your chain on the road. The Patented design is the creation of Prestacycle's good friend and associate – cycling engineer Tomo Ichikawa. It removes the quick-link, which is the only function you need. When quick links are installed, pedal pressure can lock the installed quick link without any tools. For regular chain service, we still recommend a quick link tool, but with our feature, you no longer need to carry a separate tool with you on the bike. Quick-link removal Instructions: Place the quick Link near the top of the crank Jump the chain forward one tooth so the quick-link stands-up Use the slot on the Prestalever to push down FIRMLY. (The crank tooth will support the other end from underneath.) T-handle Tubeless Tire Plugger (optional parts required – Available 12/15/2021) The center of the Prestalever has threads which accept our Tubeless tire plugger. It then forms a T-Handle for effective, centered pushing of the included "Bacon Strips" used to seal large cuts in Tubeless tires. Third-hand Tool for Hand Installation Certain tires have delicate beads. Tire manufacturers recommend hand-installation only. The Prestalever can be used as a "third-hand" tool. When you hand-install the bead in one direction, the tire starts lifting-out at the other end. Insert the lever at one end to hold the bead, then use BOTH hands to install the tire from the other end. Tubeless Tire Removal (or any Difficult Tire) The Prestalever is the #1 tool for removing difficult tires. Using two or three can help with the toughest tire and wheel combo's. Insert a lever, but do NOT flip it yet. The rim hook will hold the lever in place, but unlike traditional levers that hook onto spokes, the bead will NOT be tensioned. You can still fit-in more Prestalevers. Insert the levers spaced about 6 inches apart, then flip them all … one-at-a-time. Even the toughest tires will come right off the rim in seconds. Prestalever is different… designed from the start with real-world experience on bicycles. Specifications: - One-end: purpose-designed Tire Remover - The-other-end: purpose-designed Tire Installer - Presta Valve Core tool - Quick-link Chain breaker. - Threads make it a T-Handle Tubeless Tire plugger (plugging kit additional). - Use multiple levers for tough, delicate tires like Road Tubeless and Gumwall. - Dimensions: 100mm x 13mm x 12mm - Weight: 13 grams Disclaimer: Check with the manufacturer of your wheels and tires to verify application and fit. Some manufacturers specify hand installation and removal only. Always follow Manufacturer guidelines for tires and wheels.
$9.99
• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch
$9.99
Ask any shop wrench what their favorite, most-used tool is and they'll probably answer the 3-way. Sunlite's Y-Socket Wrench has 8, 9, and 10mm socket wrenches. The rubber handle lets you wrench all day in comfort, too.
$9.99 - $10.99
- Zyklop socket with 3/8 inch drive and holding function - "Take it easy" Tool Finder with color coding according to size
$10.00
Works with the following forks: - Pike - Lyrik - SID - Revelation - Reba - Paragon This tool can also be used to remove and install SRAM/Shimano cassettes.
$10.95
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
$10.95
A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”
$10.99
Add on-tool storage and eight frequently used bits to the Multi-Torque, T-Handle Bit Drive, or Pro Bit Driver. The set includes our new JIS compatible #2PH screwdriver bit and like all Pedro's hex bits, each is made from premium S2 tool steel. - TPR holder designed to fit Multi-Torque, T-Handle Bit Drive, and Pro Bit Driver. - Bits made from premium S2 tool steel to ensure strength and lasting performance. - Includes 2, 2.5, 3, 4, 5, 6mm hex, T25 torx, and JIS compatible #2PH screwdriver bits.
$10.99
Sunlite's Series II Chain Tool works with Shimano IG, HG, and UG chains. The vinyl coated handles make chain maintenance a breeze, and the screw style makes loosening up a stiff link easy.
$11.39
- 9 function multi tool - Hex keys: 2/2.5/3/4/5/6/8mm - Flathead and Phillips screwdrivers
$11.95
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.
$11.99
A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. - Durable composite body is durable and prevents scratching of expensive components - Angled Shimano Di2 E-TUBE ends allow for both installation and removal in tight spaces - Universal coin cell tool helps remove and install battery covers on SRAM eTap
$12.00
If there ever was an underrated tool that you probably don’t have in your bike tool kit, it has to be the Valve Core Wrench. Designed to remove or install Presta Valve and Schrader Valve cores, this tiny tool can truly make the process of installing or refilling flat-prevention liquids and gels quick and painless. The versatility of the valve stem tool supports both valve types found on mountain bikes, road bike, commuting and electric bikes – never be stranded on your commute thanks to the Valve Core Wrench. Available separate, or found in our Team Edition and Ride Prep Tool Kits. - Fits Presta Valve and Schrader Valve bike tubes - File tread grip creates a comfortable and ergonomic grip - CRV tool steel metal core makes this a one-time purchase - Aides in the overhaul of suspension forks and rear suspension shocks - Found in our Ride Prep and Team Edition Tool Kits - Limited Lifetime Warranty
$12.00
- Handy tool to have to easily install your KMC MissingLink. - Easy to handle! - Very comfortable!
$12.00
Vinyl adhesive decal, perfect for tool boards, vehicles and trailers. Available in black or white. Dimensions: 36 x 4.5-inches
$12.49 - $13.49
Y-Style Hex Wrench - Perfect for common hex hardware found on modern bicycles and components. - New improved ergonomic Y-style handle design. - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication. - Designed to stand up to the harsh conditions of professional use. - Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use. - The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification. - Backed by Pedro's lifetime warranty.
$12.50
Bicycle maintenance is often delicate, precision work. Having an ergonomic allen wrench set or torx bit set in the palm of your hand is an ideal resource for any mechanic. With these tools alone, installing bike accessories or making component adjustments is quick and simple. Available individually, or find them in our Team Edition and Ride Prep Tool Kits. - 2 / 2.5 / 3mm Allen wrench set - Ergonomic, overmolded rubber grip for comfort and precision - Durable polymer core creates a flex-free platform for confidently turning tight bolts - Hardened CRV tool steel maintains precise contact edges - Suitable for low and high torque adjustments on bicycle-specific components - Limited Lifetime Warranty
$12.79
The Origin8 Revolvr BB Cup Tool features a fiber-reinforced nylon socket for damage-free installation and removal of 16-notch BB cups. It works with 1/2-inch-drive ratchets and torque wrenches.
$12.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$12.95
The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.
$12.95
Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. For water bottle, toe clip, fender and rack bosses. The TAP-8 is 5mm x 0.8 for use with water bottle, toe clip, fender and rack bosses.
$12.95
Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-9 is 6mm x 1mm for cantilever brakes and large fender bosses.
$12.95 - $19.95
World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!
$12.95
Park's Spoke Wrench For Shimano Wheel Systems is the right tool for the job. It's made of durable tool steel and features 4.4mm and 3.75mm openings to fit all Shimano Wheel System nipples located at the hub and at the rim. It's vinyl-coated for a great grip, too.
$12.95
Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-7 is 3mm x .5 for use with rear wheel drop-out alignment screws.
$12.99
- Redesigned TPR handle features improved ergonomics with slimmer profiles, improved tip clearance, full long-leg coverage, easy-to-read size marking, and color band for quick wrench identification. - Made from heat-treated S2 tool steel to ensure high strength and lasting performance. Pedro's Pro T/L wrenches have become a favorite of mechanics around the world. The updated wrenches feature a new handle shape with slimmer profiles and full long-leg coverage for enhanced comfort and control, improved tip clearances, easy-to-read size markings, and color bands for quick identification. Each wrench is crafted from premium S2 tool steel to ensure the strength and lasting performance. Extra length on each leg of the wrench offers better leverage and easy access to hard-to-reach bolts.
$13.00
Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.
$13.50
Bicycle maintenance is often delicate, precision work. Having an ergonomic allen wrench set or torx bit set in the palm of your hand is an ideal resource for any mechanic. With these tools alone, installing bike accessories or making component adjustments is quick and simple. Available individually, or find them in our Team Edition and Ride Prep Tool Kits. - 4 / 5 / 6mm Allen key set - Ergonomic, overmolded rubber grip for comfort and precision - Durable polymer core creates a flex-free platform for confidently turning tight bolts - Hardened CRV tool steel maintains precise contact edges - Suitable for low and high torque adjustments on bicycle-specific components - Found in our Team Edition and Ride Prep Tool Kits - Limited Lifetime Warranty
$13.95
Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-10 is a 10mm x 1mm thread, the same thread for the derailleur hanger.