Saris' Spare Tire Plate is for use with their spare tire racks. Grab the Spare as an extra or replacement part.
The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon. • Sold as a set of two • Replacement parts for broken or lost end caps
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Thule's Gate Mate is made from heavy-duty vinyl with foam padding that protects both your bike and your truck's tailgate. Integrated Knock-Blocks prevent your bikes from sliding off the edge of the tailgate and causing damage to your vehicle and/or bike. Nylon straps keep the pad securely attached to your tailgate and anchors provide secure tie-down points for your bikes and other loads. And, you don't have to remove the pad to get to the tailgate's handle thanks to the convenient Handle Hood. The Small size is 54 inches for compact trucks, the Large is 62 inches for full-size trucks.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
The 12 x 100 mm thru-axle adapter allows modern road bikes to quickly secure to any traditional 9 mm fork mount bike tray. A simple thru-axle adapter that allows modern road bikes to quickly secure to any fork-mount bike rack. - 12mm x 100mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”
Yakima's Bolt Toploader Brackets are permanently mounted brackets that allow Yakima 1A Raingutter Towers or Q Towers to be used in some situations where your car doesn't have rain gutters (towers sold separately).
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Pair of EndCaps for Yakima CoreBar.
DrTray is the ultimate tray rack for your hitch. It can easily handle road, mountain, and fat-tire bikes with up to 5” tires. Bike clearance is top notch, with 18” between the trays. To make it even better, the bike tray spacing can be adjusted tool-free while the bikes are loaded, virtually eliminating any issues with bike-to-bike interference. The ergonomic remote tilt lever is intuitive to use and allows quick access to the rear of the vehicle as well as a convenient carrying handle. Its locking SpeedKnob delivers simple and secure vehicle attachment, and exceptional bike theft protection is built in with a burly SKS cable lock system. Plus, DrTray is adaptable – add an EZ+1 to carry a third bike! - Weighs in at only 34 pounds– the lightest rack in its class. (2” receiver Model only) - Securely carries 26” to 29” wheels and tires up to 5” wide - Unrivaled spacing between bikes - up to 18” between each bike - Tool-free adjustment while bikes are loaded minimizes the potential for bike-to-bike interference - Easy-to-use remote tilt lever and lightweight, aluminum design makes raising and lowering the rack a breeze - Tool-free locking SpeedKnob for a secure and easy install to your vehicle - Extra burly SKS cable lock system for each bike secures both wheels and frame - Add the EZ+1 and carry a third bike (2” receiver model only, sold separately) TECHNICAL SPECS - Weight: 34.00 lbs - Dimensions: L 16.00” x W 54.00” x H 11.50”
- Expands the DrTray carrying capacity - Securely carries road bikes, mountain bikes, and up to 5" fat bikes - Quick and easy to put on and take off - SKS cable lock system secures both wheels and frame to help prevent theft - Elevated for added clearance between bikes - Max bike weight 40lbs - 11.5" spacing between bikes plus elevated - Weight 14lbs
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"
Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
Pair of EndCaps for Yakima JetStream bars.
Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.
Yakima's Locking Brackets replace two of the regular mounting brackets that come with your MegaWarrior and LoadWarrior luggage carriers so that you can safely secure these baskets to your crossbars. You get two Locking Brackets, Lock Cores and keys.
Product details: - Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes - Allows most RoundBar style mounts to attach in minutes - Tool free installation - Sold as a set of 4 - Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase
Take sleek to a new level – the ingenious RidgeLine Towers integrate with flush-mount factory side rails so you can build a real rack that carries more. Strong and versatile, they attach easily and have a sleek design that aligns with your vehicle’s aerodynamic attitude. - Attaches a base rack system to vehicles with flush-mount factory side rails. RidgeClips and crossbars required for a complete system. - Both are sold separately. Use Fit My Vehicle to find the clips and crossbars. - Advanced design is strong and quiet and aligns with aerodynamic vehicle aesthetics - Works with JetStream, CoreBar and RoundBar crossbars - Unique clip design adapts to your rails for a secure, accurate fit - BarBed has 12° of pitch adjustment to optimize tower position and level bars - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Weight: 1.25 lbs - Dimensions: L 5.00” x W 5.25” x H 3.50”
Page 1 of 4 Next page