Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Yakima World Strap
$11.99
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.
Thule Fat Tire Kit for T2 Racks
$59.95
With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.
Thule No-Sway Cages
$29.95
Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).
Thule Passive Lock Strap
$29.99
Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.
Saris Bike Beam
$49.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris Hatch Huggers
$24.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
RockyMounts Lock Core
$21.99 - $39.99
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
Kuat 1.25-inch to 2-inch Adapter
$15.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.
Kuat 1/2-inch Locking Hitch Pin
$29.00
The lock comes with a burlap bag, dust cap, two keys, and a Kuat keychain bottle opener. 3/8" pin is for our 1.25" racks and the 1/2" pin is for our 2" racks.
Kuat Hi-Lo
$69.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
Kuat Hi-Lo Pro
$119.00
The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only
Kuat Lock Cores
$20.00
Replacement lock cores Kuat Racks lock systems. Comes with lock cores, keys, and 1 core removal tool. This part is not made for Kuat's NV rack, Sherpa rack, or any other hitch mounted rack.
Kuat Phat Bike Kit
$10.00
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
Kuat RackDock Rack Storage
$89.00
RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate
Kuat Transfer Lock Kit
$39.00 - $49.00
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Kuat Ubar
$35.00
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes
Yakima 9-Foot SKS Cable
$39.00
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
Yakima Accessory Lock Housing
$19.00
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty
Yakima BackSwing
$299.00
Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Yakima BaseClip
$63.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima Control Key Single SKS
$4.50
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
Yakima EXO GearTotes
$49.00
Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty
Yakima Fat Bike QR Locking Skewer
$39.00
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
Yakima HD Bar SL Adapter
$30.00
The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up. - Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four. - Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only. - Weight: 0.42 lbs - Dimensions: L 1.75in x W 1.50in x H 1.00in - No Assembly Required
Yakima Holdup Wheelstrap
$3.30
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima Landing Pad 23
$126.00
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in
Yakima LongArm Pad
$19.00
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Yakima RidgeClip
$126.00
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
Yakima SKS Lock Cores (2-Pack)
$40.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS Lock Cores (4-Pack)
$60.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
Page 1 of 6 Next page