Tires/Tubes

- Premium alloy presta valve caps in an array of colors

Whisky Parts Co. Tubeless Rim Tape.

- Shim adds support to Presta stem used in a Schrader rim

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

Special compound and tread pattern and our strongest casing are designed expressly to disperse heat and reduce noise generated by home trainer use. - Ideal for rollers or turbo trainer - Also available for 26 inch MTB wheel size

Indoor-training has never been so technical! Featuring our special compound and tread pattern and our strongest casing, this tire is designed expressly to disperse heat and reduce noise generated by home trainers. Keep your race tires clean and safe for race day, and spend your indoor-training miles on the Zaffiro Pro Home Trainer.

Front and rear BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness

GRAVEL Cannonball is a go-to gravel race tire for normal conditions. The tread pattern features a directional, tight-knit center tread that sheds dirt and debris to decrease rolling resistance, and side knobs for effective cornering traction. Cannonball is built for all-around gravel riders and racers. HOW IT WORKS - Center lugs are raised and ramped for rolling efficiency; the diamond-shaped lugs squeeze in for grip as they contact dirt, then back out to shed debris. - Transitions lugs are spaced out and vary in height to boost traction. - L-shaped side lugs dig in for grip while braking through corners, but roll quickly when off the brakes.

- Labeled Size: 26 x 4.0 – 4.8 - ISO Width: 100mm – 120mm - ISO Diameter: 559 / 26" MTN - Wall Thickness: 1mm - Valve length: 32mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 580g

- Size: 26 x 2.4 – 2.7 - Can be used with fat bike tires 4.0" and under - ISO Diameter: 559 / 26" mtn - ISO Width: 60mm, 61mm, 62mm, 63mm, 64mm, 65mm, 66mm, 67mm, 68mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 256g

- Size: 14 x 1.5 – 2.25 - ISO Width: 44 – 55mm - ISO Diameter: 254 / 14" - Wall Thickness: 0.9 - Shaft Type: Smooth - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- Low Lead Valve - ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 76g (1.25-1.5), 92g (1.5-1.75), 102g (1.75-2.125)

- Low Lead Valve - ISO Diameter: 355 - ISO Width: 44mm , 45mm , 46mm , 47mm , 48mm , 49mm , 50mm , 51mm , 52mm , 53mm , 54mm - Labeled Size: 18 x 1.75-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 118g

- ISO Diameter: 438 , 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm - Labeled Size: 20 x 1-1/8 - 1-3/8 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 98g

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Labeled Size: 24 x 1 - ISO Diameter: 540 / Wheelchair - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta Short 32-40mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 83g

- Low Lead Valve - ISO Diameter: 540 / wheelchair - ISO Width (mm): 35mm - Labeled Size: 24 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 124g

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Size: 26 x 2.4 – 2.75 - ISO Diameter: 559 / 26" mtn - ISO Width: 60mm, 61mm, 62mm, 63mm, 64mm, 65mm, 66mm, 67mm, 68mm, 69mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 283g

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable

- Size: 650B x 35 – 43 - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 83g

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth

Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Surly Inner Tube to fit a wide range of plus-size and fat bike tires. - Labeled Size: 26 x 3.0 - 4.8 - Weight: 310 g - Valve Core: Removable - Shaft Type: Threaded - ISO Width (mm): 76mm–100mm - Tube Compound: Butyl - ISO Diameter: 559 / 26-inch MTN - Valve: Presta Short 32-40mm

- Park/street tire, with directionally grooved tacky tread - Wire bead - Size: 16 x 1.75

- Entry-level Freestyle tire with durable casing to prevent pinch flats - Wire bead - Size: 20 x 1.75

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

- Valve: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Urban tire with raised center for reduced rolling resistance - Size: 26 x 1 3/4 - ISO 571

- Urban/recreational tire with shallow, grooved tread for multiple conditions - 12 1/2 x 2 1/4

- Valve Type: Presta - Valve Core: Removable - Butyl rubber - Wall Thickness: 4.3mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 4.3mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 4.3mm - Thorn-resistant

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 4.3mm - Thorn-resistant

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm - Flat Fold Width: 44mm (1.75-2.10), 65mm (2.50-3.0), 78mm (3.0-3.50)

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Wall thickness: 0.9mm - Removable valve core

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

- Tubeless Valve compatible with Stan's ZTR rim - Sold as a pair

Specialized's 2Bliss Ready Rim Strips create a secure barrier, from sealant to rim, in a clean, simple to install strip. Mountain bike riders running 2Bliss can now change tires quicker and easier than with any other tubeless system. Diameter / Width - 26" — 23mm-559 PV - 26" — 25mm-559 PV - 650b — 31mm-584 PV - 650b — 39mm-584 PV - 29" — 23mm-622 PV - 29" — 25mm-622 PV - 29" — 31mm-622 PV

Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3" 80-100ml - MTN: 2.4-3.0" 100-125ml

We're not afraid to say it—our Airlock Presta Valve Tubes are the best performing, self-sealing bicycle tubes available on the market. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for greater protection. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles.

We're not afraid to say it—our Airlock Schrader Valve Tubes are the best performing, self-sealing bicycle tubes available. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for the best chance of reducing punctures. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

The All Condition Armadillo continues to be the leading tire for anyone who needs top performance blended with puncture-resistance. This workhorse tire is impressively robust for touring and commuting, as well as being tough enough to navigate the roughest road conditions. - Casing: 60 TPI - Bead: Wire - Compound: 60a - Flat Protection: Armadillo - 27 x 1-1/4", PSI 85-95, approximate weight 460g

The All Condition Armadillo continues to be the leading tire for anyone who needs top performance blended with puncture-resistance. This workhorse tire is impressively robust for touring and commuting, as well as being tough enough to navigate the roughest road conditions. - Casing: 60 TPI - Bead: Wire - Compound: 60a - Flat Protection: Armadillo - 700 x 23mm, PSI 110-125, approximate weight 360g - 700 x 25mm, PSI 110-125, approximate weight 395g - 700 x 28mm, PSI 85-95, approximate weight 440g - 700 x 30mm, PSI 85-95, approximate weight 480g - 700 x 32mm, PSI 85-95, approximate weight 510g

The All Condition Armadillo Elite is the most flat-resistant tire available. Impressively though, it has performance characteristics that far exceed many competitor's race tires. We've given it a tread pattern that offers excellent all-weather traction, and newly-sourced materials for the best puncture protection possible. In terms of ride quality, our GRIPTON compound is surpassed by none. It provides low rolling resistance and the ultimate in dry and wet condition traction. Without hyperbole, it's the best flat-resistant, high-performance tire that we've ever made. - Casing: 120 TPI - Bead: Foldable - Compound: GRIPTON - Flat Protection: Armadillo Elite - 700 x 23mm, PSI 110-125, approximate weight 285g - 700 x 25mm, PSI 110-125, approximate weight 315g - 700 x 28mm, PSI 85-95, approximate weight 350g - 700 x 30mm, PSI 85-95, approximate weight 400g - 700 x 32mm, PSI 85-95, approximate weight 430g

The latest generation of the World-Cup-proven intermediate tire, the Butcher BLCK DMND 2Bliss Ready, receives sawtooth faces on the tread blocks to increase stability under load and to provide additional biting edges. This, in turn, improves rolling speed as well as control under hard braking and cornering. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, gripping the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. The new BLCK DMND casing strikes the balance between suppleness and extreme pinch flat protection. In order to descend all-out, you need as much traction as possible, the tire needs to conform and hold on to the ground, but also protect from pinch flats. In order for this to happen, only the treaded part of the tire needs to conform, grip, and dampen, while the tire base offers stability and support for steering inputs. - Folding bead - 2Bliss Ready - Compound: GRIPTON - Pressure: 25 – 50psi - Casing: Center Overlap, Flip Up, and Rubber Apex

The latest generation of the World-Cup-proven intermediate tire, the Butcher BLCK DMND 2Bliss Ready, receives sawtooth faces on the tread blocks to increase stability under load and provide additional biting edges. This, in turn, improves rolling speed as well as control under hard braking and cornering. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed, keeping the speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. The new BLCK DMND casing strikes the balance between suppleness and extreme pinch flat protection. In order to descend all-out, you need as much traction as possible—the tire needs to conform and hold on to the ground, but also protect from pinch flats. In order for this to happen, only the treaded part of the tire needs to conform, grip, and dampen, while the tire base offers stability and support for steering inputs. - Casing: Center Overlap, Flip Up and Rubber Apex - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 27.5 x 2.3", psi 25-50 - 27.5 x 2.6", psi 20-40 - 27.5 x 2.8", psi 15-30